Finish

We can supply our cages in any British standard colour.

Popular choices are goose wing grey, Black and Graphite grey

If the cage is external we supply the cage is Hot dip galvanized, It it is not possible to supply galvanized then powder coated due to the nature of hot dip galvanising on mesh.

Installation

Our Installation is carried out only by our team of experienced fitters who all carry CSCS cards and forklift licenses.

We can work around objects in situe such as servers or pallet racking. As all the panels are made off site the panels bolt together without any need for cutting. This means that very little mess is created.

Power will be required to drill and tap the hinges, bolt down the cage then cut an acceptance hole for the lock.

Method statements and risk assessments are available.

110V power supply is used. All our power tools are regularly PAT tested.

We can carry out a site survey before manufacture, this is charged at £450.00.

This is not normally necessary; a couple of photos and a few measurements is all we require to manufacture.

Installation Process.

1. Bring in Panels and unpack.
2. Check layout drawings and assign anels to positions
3. Fit bars or mesh under floor tiles if required (Normally in datacenters)
4. Bolt together panels and fit mesh roof. (Bolts are within framework)
5. Hang door (drill and tap hinges and cut acceptance hole for lock)
6. Bolt down cage
7. Check for snags
8. Tidy up

Aplications

Measure up guide

Method statement

METHOD STATEMENT And RISK ASSESMENT

Security Cage

                                                                   Contents

            Section                                           Heading                                        Page

                 1)                                                 Purpose                                             2

                 2)                                                 Scope                                                2

                 3)                                                 Procedure                                         2

                 4)                                                 Safety                                               3

                 5)                                                 Responsibilities                                3

                 6)                                                 Risk Assessment                             3

            Ref                 Prepared by                Date                Checked by         Date

                                    A. Beard                     Date:                                      

METHOD STATEMENT CONTINUED

1.0       Purpose

To provide and install a security cage .

2.0       Scope

1. (a)Unloading and positioning of cage sections.
2. (b)Erecting of cage.
3. (c)Clearing of work area

3.0       Procedures

1. a)Ensure that it is safe and permissible to work with the Site Foreman or authorised agent.
2. b)On arriving at Site, logistics will escort to installation location.
3. c)Request Security to isolate the aspirating and fixed head smoke detection systems for the duration of the works when working within the room if applicable.
4. d)Display, as appropriate, warning signs of ‘men working’ and ‘floor tiles lifted’.
5. e)Refer to customers order and instructions.
6. f)The delivery lorry is to operate on site in accordance with customers site procedures and using a banksman for all reversing operations.
7. g)The pre-manufactured sections of cage are to be offloaded and placed within a designated clear area within the room.
8. h)The cage sections are to be positioned, bolted together and fixed to the building structure.
9. i)The door is to be fitted and a 6-pin insurance approved euro cylinder lock or other as approved by customer.
10. j)It is preferred that a 3mm thick door track be fitted for alignment of the sliding door, however this can be omitted if felt necessary.
11. k)Check alignment of the door and cage sections and the rigidity of the whole structure.
12. l)Make good any defects .
13. m)A vacuum cleaner is to be used in conjunction with any drilling of the building structure to prevent spread of dust.
14. n)Any plant and tools required shall be checked prior to use to ensure that all equipment is of a safe standard.
15. o)On completion of the works the area shall be left clean and tidy, and all redundant materials removed from site.
16. p)Inform the Site Foreman or authorised person that the work is complete.

4.0       Safety

                All works are to be carried out in accordance with all applicable Regulations and site rules, the Health and Safety at Work act and any other regulations applicable.                                 

5.0       Responsibilities

The persons responsible for implementing the procedures shall be a suitably qualified tradesman designated by Fine Mesh Metals.

6.0       Risk Assessment

a)         Falling through open tiled floor area: Reduce risk by placing safety barriers and notices around affected area.     

1. c)Tripping: Reduce the risk by keeping all trailing leads to a minimum, tape down to floor any excessive trailing leads. Always keep area clean and tidy.

1. d)Manual Handling: Use protective boots, gloves and carry out work in accordance with Fine Mesh Metals standard ‘Manual handling’ method statement

1. e)Falling from height: Steps may be required for some of this work, if the need arises then these shall be used in accordance with the Fine Mesh Metals ‘working at height’ standard method statement.

1. f)Always use appropriate PPE for the task undertaken.

THIS ASSESMENT IS TO BE IMPLEMENTED IN FULL AT THE FOLLOWING SITE

SITE                       ………………………………….

DATE     …..………………………………………………………………………

SIGNED ON BEHALF OF FMM        …………………………………………………………..